Now You Can Skip the Time Consuming Tasks
Traditional vs.
20+ hours of hands-on time
10+ instruments needed
Tedious steps like manual washes, multiple reagent additions, manual pipetting, and incubation cycles have become the norm in traditional methods.
Lab technicians are tied to the bench, attached to a timer for the entirety of the run, to perform each protocol step at precise moments.
5-20 minutes of hands-on time
1 integrated system
With Bruker Cellular Analysis' fully automated fluidics system, there are no manual washes, no reagent additions, and no need to perform standard curve serial dilutions.
Just pipette your samples into the chip, load the chip into the system, select the assay you'd like to run, and walk away!
Workflow
Prepare all reagents as instructed
Add 50 µl of sample to each well
Add 50 µl of diluted microparticle cocktail to each well
Incubate for 2 hours at RT on a shaker at 800 rpm
Remove the liquid from each well with 100 µl wash buffer
Perform the wash 3 times
Cover and incubate for 1 hour at RT on a shaker at 800 rpm
Repeat washing procedure
from step 5
Add 50 µl of diluted biotin antibody cocktail to each well
Cover and incubate for 1 hour at RT on the shaker at 800 rpm
Repeat washing procedure
from step 5
Add 50 µl of diluted Steptavidin-PE to each well
Incubate for 30 minutes at RT on the shaker the 800 rpm
Repeat washing procedure
from step 5
Add